Maximum 1,110 point combination addressable fire alarm control and emergency voice system panel. Includes connected panel options, enhanced communications, wireless detection and other advanced features. (Replaces the 5820XL-EVS).

The EVS-LOC is a powerful addition to any emergency voice system for mass notification purposes. The console is a combination supervised remote microphone and annunciator which is compatible with the EVS-Series Emergency Voice System.

The SK-FFT is a Fire Fighters Telephone Communication System. The SK-FFT with keypad, provides indications of phone activation, and corresponding trouble conditions. The FFT-24 expander board lets you add additional zones to the SK-FFT. The SK-FFT can use one FFT-24 for a total of 48 zones. Each zone consists of one addressable monitor module (SK-Minimon) and a minimum of one Fire Fighter Telephone Jack (FFT-FPJ).

The SKE-Series Voice Evacuation system provides 50 watts of output power. The SKE-Series system consists of two different models, the SKE-450 and SKE-450-ZN4. Each model has a built in Digital Message Repeater, power supply and a supervised microphone. Both models have two alarm inputs, one triggered by reverse polarity and one by supervised dry contact trigger. The system supports 25 or 70.7 VRMS operation to accommodate most installations. The audio messages are field programmable via the built in microphone, through the line level input, or by downloading via the internet. The model SKE-450-ZN4 also contains a zone splitter capable of dividing the speaker output into 4 separate outputs.

The EVS-100W is an intelligent 50/100 watt amplifier for use with Version 14.0 or newer 5820XL-EVS. The EVS-100W is used to amplify audio message for distribution throughout a facility. The EVS-100W is capable of producing up to 100 watts of audio power and has the ability to provide an option for 50 watts of backup power.

The EVS-INT50W is an intelligent 50 watt amplifier for use with version 14.0 or newer 5820XL-EVS. The EVS-INT50W mounts in the 5820XL-EVS and 5895XL cabinets and is used to amplify audio messaging throughout an area or facility. Power for the EVS-INT50W is obtained from the 5820XL-EVS or 5895XL addressable power supply.

The EVS-50W is an intelligent 50 watt amplifier for use with version 14.0 or newer 5820XL-EVS. The EVS-50W is used to amplify audio messaging throughout an area or facility. The EVS-50W is capable of producing 50 watts of audio power over 4, expandable to 8, fully programmable speaker circuits.

The EVS-125W is an intelligent 125 watt amplifier for use with version 14.0 or newer 5820XL-EVS. The EVS-125W is used to amplify audio messaging throughout an area or facility. The EVS-125W is capable of producing 125 watts of audio power over 4, expandable to 8, fully programmable speaker circuits.